| Kits Include: 4-feet of Fuel Hose, Inline Valve, Aluminum Filter, Brass Outlet Fitting, Brass T-Fitting, (8) Hose Clamps, and Loctite 567 |
| $39.00 Free Shipping |
Includes Tank,
(2) Hose Clamps,
Drain Valve
and 2 fittings shown
(2) Hose Clamps,
Drain Valve
and 2 fittings shown
| 1/4 Fuel Line |
| 3/8 Fuel Line |
| Fits into Fuel Line |
| Threaded Side Goes in Tank Outlet Elbow Barb Fits into Fuel Line |
| 1/4NPT Thread x 1/4 Fuel Line Barb |
| 5/16 Fuel Line |
| 5/16 ID Deluxe Kit $59.00 |
| Fuel System Connection Kits Parts you'll need to connect a Tour Tank to your bike's fuel system. |
| 1/4 ID Deluxe Kit $59.00 |
| 3/8 ID Deluxe Kit 59.00 |
| 1/4NPT Thread x 3/8 Fuel Line Barb |
| Your choice of 1/4 or 5/16 or 3/8 ID Fuel Line and Parts |
| Keep the gas off the garage floor and the smell out too with our dripless Quick Disconnects |
| Heavy Duty Black Nylon Cover with four O-Rings Any Size Tour Tank |
| Fits into Fuel Line |
| Colder Chromed-Brass Shut-off Valved Quick Disconnects for your fuel line |
| Your Choice $42.00 Each |
| Motorcycle Puke Tank Connect this tank to your Tour Tank's Vent Tube to catch any gas splash-over. Then when you stop put a cup under the valve and open it for the gas to drain and put the gas back in your tank. |
| Replacement or Extra Tour Tank Gas Cap $16.00 |
| Vented Cap (For tanks without vent tubes) |
| Non-Vented Cap (For tanks with vent tubes) |
| Free Shipping on all parts on this page! (Note: If you live outside the USA Free Parts Shipping is only applicable with a Tour Tank order.) |
| Aluminum Filter Bronze Element $10.00 |
| 1/4-5/16 ID Hose |
| 3/8 ID Hose |
| Extra QD ORing $3.50 |
| If you already have your Tour Tank $89.00 |
| When Purchased at the same time as your Tour Tank $79.00 |
For transferring fuel from your Tour Tank to your main tank. If you don't want to hook up your Tour Tank
to your bike's fuel system this is the way to go. Of course you must be stopped to do this.
to your bike's fuel system this is the way to go. Of course you must be stopped to do this.
| Fuel Transfer Kits |
Kit includes top quality ball valve that threads into the tank. Brass elbow that threads into the valve and has
barb fitting for hose connection. Five feet of hose. Two Hose Clamps. And a tube of Loctite 567 See sizes
below. Note that if your Tour Tank outlet is higher than your main tank's gas cap then gravity will do the
work. If the Tour Tank's outlet is lower than your main tank's cap then you will need a fuel pump in the
hose.
barb fitting for hose connection. Five feet of hose. Two Hose Clamps. And a tube of Loctite 567 See sizes
below. Note that if your Tour Tank outlet is higher than your main tank's gas cap then gravity will do the
work. If the Tour Tank's outlet is lower than your main tank's cap then you will need a fuel pump in the
hose.
| 3/8" Kit Valve 3/8 Elbow 3/8 Hose $49.00 |
| 1/2" Kit Valve 1/2 Elbow 1/2 Hose $59.00 |
| Loctite 567 Thread Sealant for tank threads and brass fitting threads $9.50 |
| In-Line Brass Fuel Valves Your choice of size $24.00 |
| For 3/8 inch hose |
| For 1/4 inch hose |
| For 5/16 inch hose |
| NPT Ball Valve Male on one side and Female on the other. Your choice of size $25.00 |
| 1/4NPT Valve |
| 3/8NPT Valve |
| 1/2NPT Valve |
| (4) Aluminum Mounting Bushings 1-inch tall x 1-inch OD 5/16 Diameter Hole $19.00 |
| Aluminum Mounting Plate 8-inches square x 1/4-inch Thick $28.00 |
| Use these mounting bushings to space the brackets or the mounting plate. |
| This high quality aluminum plate can be used to mount the brackets. |
| Brass Elbow Threads into the Tank $8.00 |
| 1/4 Barb |
| 5/16 Barb |
| 3/8 Barb |
| 4 feet of High Quality Fuel Hose $7.00 |
| 1/4 ID |
| 5/16 ID |
| 3/8 ID |
| Tour Tank Parts |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
